Components:

Front lights: Sequential bumper lights

Bumper-Mounted LED Turn Signal & Daytime Running Lights – Sequential Flashing Feature (Fits HD Bumpers, Including 2025 Ranger 1000XP) Upgrade your vehicle's visibility and style with these premium LED bumper lights, designed specifically for HD bumpers, including the 2025 Ranger 1000XP. Each side features two high-performance LED units, delivering bright daytime running lights (DRL) for enhanced safety and dynamic sequential turn signals for a modern, eye-catching effect. These lights are engineered for a seamless installation, securely mounting onto your bumper using the existing factory tabs—no modifications required. Built to withstand tough off-road conditions, they ensure long-lasting durability and reliable performance in any environment. ✅ Dual-function LEDs – DRL & Sequential Turn Signals ✅ Precision-fit for HD bumpers (including 2025 Ranger 1000XP) ✅ Easy bolt-on installation – Uses factory mounting tabs ✅ Rugged, weather-resistant construction Enhance your bumper's functionality and aesthetics with these high-visibility, sequential LED lights, ensuring you're seen on and off the road.

Column mounted lever switch- black

Black lever switch with hazard function

Adjustable flasher relay

Flasher relay with adjustable flash rate. Use the dial to adjust the flash rate. This flasher (CF3) can be replaced with the non adustable EP34 in a pinch. Installation: the relay should be mounted away from water. It is best to zip tie a plastic bag around the relay if you powerwash the interior of your vehicle.

Rear tail light tie-in harness

Rear T-Harness adds rear turn signal functionality to the factory tail lights. The harness Ts into the factory harness at each rear tail light. Your vehicle needs to have tail lights with the 4 pin plug shown in the photos below.

Selectable power source

Power Source Options This exclusive option from MCSADVENTURES gives you the flexibility to choose how your turn signals operate, tailoring them to your specific needs. You can configure your signals to function only when the key is turned on, or alternatively, enable them to work even when the key is off. For instance, you might prefer to restrict signal functionality to when the key is on to prevent accidental battery drain in case a signal is left active. However, there are situations where you may need the signals to work without the key, such as leaving your vehicle parked along a road with the hazard lights on for added safety. This option empowers you to easily switch between these two modes, ensuring convenience and peace of mind in any scenario. At MCSADVENTURES, options are mandatory.

Features

1. Heavy Duty Column-Mounted Turn Signal Switch:

   • Unlike typical rocker or toggle switches, the column-mounted turn signal switch is a much safer and more natural method for signaling. This switch is metal-bodied, providing durability and a more solid, premium feel compared to plastic units.
   • It includes built-in indicators for easy visibility and a hazard option for additional safety.
   • Column-style switches are known for their ease of use and intuitive operation, ensuring you can focus on driving safely while signaling.

2. Instrument Cluster Integration:

   • For machines equipped with an instrument cluster, this kit offers optional integration, allowing the turn signal indicators to appear on the cluster for added convenience and visibility.

3. Factory Brake Lights as Brake and Turn Signals:

   • The kit utilizes the factory brake lights and converts them to function as both brake lights and turn signals, just like modern vehicles. This offers a clean, streamlined solution while keeping the vehicle’s appearance intact.

4. License Plate Light Power Feed:

   • The rear harness includes a license plate tag light power feed, ensuring that your license plate can be illuminated when the key is on (note: license plate mount and light are not included).
   • This feature is customizable, allowing you to select your preferred license plate light and mount, making it versatile and adaptable to your needs. It also allows for flexibility, as not all areas require license plates, and different regions may have varying plate sizes.

5. Plug-and-Play Harnesses:

   • The kit includes 2 plug-and-play harness assemblies, making installation quick and simple. No cutting or splicing required. The kit is designed for easy integration with your 2025 Polaris Ranger XP 1000.

6. Safety and Convenience:

   • The column-mounted switch ensures you can signal with minimal distraction, promoting safe driving while keeping your hands on the wheel. Plus, with the built-in indicators and hazard feature, you'll always be fully aware of the status of your turn signal system.

2 plug and play harness assemblies complete the kit.

Uses factory brake lights and converts them for use as brake AND turn signal just like many automobiles.

Specifications

Always consult your local and State laws if you intend to utilize this kit to make your machine street legal. Depending on the laws in your area this kit may or may not comply with street legal requirements.

Installation

Installation times will vary based on your familiarity with the vehicle. A beginner could plan on spending 5 hours on the install while an installer could plan on 20 to 30 minutes.

Installation Process Breakdown:

1. Plug-and-Play Harnesses:

   • All components are pre-terminated with connectors, ensuring full plug-and-play operation. This means you don’t have to cut or splice any wires. Simply plug in the connectors and the system is ready to go!

2. Rear T Harness:

   • The rear T harness is designed to plug directly into the left and right tail lights. It utilizes the rear brake lights as turn signals, just like modern vehicles, simplifying the installation and improving safety.
   • This custom harness then runs from the rear of the machine, through the tunnel and into the hood compartment, where it feeds through the firewall and up into the dash to connect to the turn signal switch.

3. Front End Harness:

   • The complete front-end harness runs through the firewall into the dash and plugs directly into the turn signal switch. This seamless connection ensures a clean, professional installation.

For power, simply plug in the power accessory plug or utilize the included ring terminal adapter harness.

Description

MCSADVENTURES turn signal kit

Plug n Play harness plugs into the left and right tail lights utilizing factory brake lights

Fits 2025+ Polaris Ranger XP 1000 (except waterfowl edition)

Extended length harness fits 2 and 4 seat models

Bumper lights bolt into the bumper cutout and illuminate white with key on

Integrated amber turn signal feature has sequential flow when turn selected

Includes unique custom surround gasket (makes for a clean finish hiding gap around light)

Why This Kit Stands Out:

1. Plug-and-Play Design:

   • This plug-and-play kit is extremely easy to install. It connects seamlessly to your existing tail lights, utilizing the factory brake lights as turn signals. This means no complex wiring or modifications—just plug it in, and you're good to go!

2. Fast and Clean Installation:

   • The fast installation process is designed to save you time while ensuring a clean, professional finish. No need for drilling or extra adjustments. It’s straightforward and hassle-free.

3. Factory-Like Integration:

   • The kit is designed to integrate seamlessly with your 2025 XP 1000, maintaining the OEM look. The bumper lights fit directly into the bumper cutouts and light up with white illumination when the key is on, giving it a sleek, modern look.

4. Modern Sequential Amber Turn Signal:

   • The amber turn signal feature includes a sequential flow effect when activated, giving your vehicle a dynamic, high-tech appearance. It’s a feature that’s both stylish and functional.

5. Affordable Price:

   • This kit provides a high-quality, factory-style upgrade at a very reasonable price, making it an excellent value for anyone looking to add turn signals and modern lighting features to their Ranger without breaking the bank.

6. No Cutting or Splicing:

   • With the plug-and-play solution, you don't have to worry about cutting wires or dealing with complicated installations. The kit is designed to simply connect into place, making it perfect for anyone, regardless of mechanical experience.