2024-12-02 We are conducting maintenance on the website shopping cart. This may limit the ability to place an order. Call to place an order.
MCS ADVENTURES
Quality UTV accessories from Advance MCS Electronics. with free 2-3 day shipping to most locations in the lower 48 states. Most orders ship the following business day and arrive in 2-3 days.877-349-5891Dealer login
Front lights: Replacement fang lights with clear lens
These replacement front fang lights include amber lights that are uses as turn indicators. The running light wires connect to the factory fang harness. The turn function plugs into our turn signal harness.
Dash mounted rocker switch - blue backlight
Carling Contura Series switches match the factory switches on many vehicles. The blue backlights in the switch also function as turn indicators.
Adjustable Flasher Relay
Flasher relay with adjustable flash rate. Use the dial to adjust the flash rate. This flasher (CF3) can be replaced with the non adustable EP34 in a pinch.
Installation: the relay should be mounted away from water. It is best to zip tie a plastic bag around the relay if you powerwash the interior of your vehicle.
Dash cluster tie-in
If you have the instrument cluster pictured, you may wish to utilize our cluster tie-in kit to utilize the indicator arrows in your OEM gauge. Simply snap the pins from our harness into the factory plug housing. Note: may not be compatible with all machines even with this cluster (example: 2018 Ranger won't work). If you choose to utilize this feature, a complete test should be performed with machine off and machine running prior to installation. Most issues with installing the cluster harness can be solved by pressing the harness pins further into the housing. The pins may click before they are fully seated.
Green led indicators are included for those unable to take advantage of the cluster tie-in. more info here
Rear tail light tie-in harness
Rear T-Harness adds rear turn signal functionality to the factory tail lights. The harness Ts into the factory harness at each rear tail light. Your vehicle needs to have tail lights with the 4 pin plug shown in the photos below.
Accessory power plug tie-in
For vehicles equipped with an accessory power bar. This power plug can be attached to the turn signal kit harness using the provided connectors.
Features
Kit is comprised of a complete switch/control module front harness which connects to a rear T harness.
Rocker switch harnesses are prewired into the main control module and simply plug onto the back of the rocker switch. No fumbling with qd terminals.
Blue illuminated Left / Right rocker lights up with key on and also flashes when selected thus indicating direction.
Includes optional instrument cluster integration for machines with the instrument cluster shown.
A custom rear T harness plugs into the left and right factory tail lights and converts the factory brake lights for use as brake AND turn signals. We also supply a license plate light pigtail that can activate your license plate light with key on.
Front fang lights quickly mount in place of the factory plastic fang accent blanks and plug into factory connector on the machine. Each fang light has a 3rd wire prepped with a connector ready to plug into the harness to provide turn signal function. No splicing or crimping wires. It simply all plugs together.
Specifications
MADE IN USA
Installation
Installation times will vary based on your familiarity with the vehicle. A beginner could plan on spending 5 hours on the install while an installer could plan on 20 to 30 minutes.
Painfully simple to install. All components terminated with connectors allowing for full plug and play operation.
Rear T harness plugs into the left and right tail lights utilizing the rear brake lights as turn signals. This custom harness feeds from the rear of machine through tunnel and up into hood compartment where it feeds through firewall into dash and plugs into the control module
A complete front end harness feeds through firewall into dash and also plugs into the control module.
For power only 3 connections to the machine are required: 12v+ batt 12v+ keyed ignition 12v-ground
A pulse power harness is included for machines with the pulse power bar.
Total install time: approx 1 hour
Photos
Description
MCSADVENTURES Rocker turn signal kit with front fang lights
Fits 19-23 RZR xp1000 and 19-21 Turbo
Fits 18-21 RZR Turbo S
Will also fit many 2021+ RZR Trail and Trail S models
Rocker switch snaps into OEM sized .83 X 1.48 cutout
Plug and Play utilizing factory brake lights
Custom rear T harness plugs into the left and right tail light harness
Extended length harness fits 2 and 4 seat models
Includes Pulse bar harness
Looking for a true plug and play way to add turn signals to your 19-23 RZR xp1000, 19-21 Turbo and 18-21 Turbo S that utilizes the factory tail lights?
We've designed a great plug n play solution at a very reasonable price.
Compatibility
Polaris RZR
2019-2022 RZR 1000
2021, 2023-2024 RZR Trail
2022 RZR Trail 900
2022 RZR Trail S
2019-2021 RZR Turbo
2018-2021 RZR Turbo S
Polaris RZR
2019-2022 RZR 1000
2021, 2023-2024 RZR Trail
2022 RZR Trail 900
2022 RZR Trail S
2019-2021 RZR Turbo
2018-2021 RZR Turbo S
Kits compatible with all trim levels and both 2 and 4 seat models unless otherwise noted.