2024-12-02 We are conducting maintenance on the website shopping cart. This may limit the ability to place an order. Call to place an order.
MCS ADVENTURES
Quality UTV accessories from Advance MCS Electronics. with free 2-3 day shipping to most locations in the lower 48 states. Most orders ship the following business day and arrive in 2-3 days.877-349-5891Dealer login
MCSADVENTURES plug and play turn signal kit for 13+ Ranger 500/570/900: Rocker switch (blue), horn / hazard, sequential bar lights (white lens) and 3/4 lights (clear lens)
MCSADVENTURES plug and play turn signal kit for 13+ Ranger 500/570/900: Rocker switch (blue), horn / hazard, sequential bar lights (white lens) and 3/4 lights (clear lens)
63259: MCSADVENTURES plug and play turn signal kit for 13+ Ranger 500/570/900: Rocker switch (blue), horn / hazard, sequential bar lights (white lens) and 3/4 lights (clear lens)
Front lights: 3/4 LED Recessed (clear lens, amber light)
3/4" Recessed Bullet LED Light - Amber Lens / Amber Light. Most of our kits ship with 3 lights per side which allows for a light to be installed around to the side for maximum visiblity.
Front lights: No-drill with sequential turn
No-drill front indicators with sequential turn function. Lights mount with all weather adhesive.
Dash mounted rocker switch - blue backlight
Carling Contura Series switches match the factory switches on many vehicles. The blue backlights in the switch also function as turn indicators.
Adjustable Flasher Relay
Flasher relay with adjustable flash rate. Use the dial to adjust the flash rate. This flasher (CF3) can be replaced with the non adustable EP34 in a pinch.
Installation: the relay should be mounted away from water. It is best to zip tie a plastic bag around the relay if you powerwash the interior of your vehicle.
Automotive style horn
Loud automotive style horn. 105db, 410hz.
Rear tail light tie-in harness
Rear T-Harness adds rear turn signal functionality to the factory tail lights. The harness Ts into the factory harness at each rear tail light. Your vehicle needs to have tail lights with the 3 pin plug shown in the photos below.
Features
Kit is comprised of a main control module harness which connects to 2 sub harnesses.
Rocker switch harnesses are prewired into the main control module and simply plug onto the back of the rocker switch. No fumbling with qd terminals or guess-work.
Blue illuminated Left / Right rocker lights up with key on and also flashes when selected thus indicating direction.
A custom rear T harness plugs into factory tail lights and converts facotory brake lights for use as brake AND turn signals. We also supply a license plate light pigtail that can activate your license plate light with key on.
Looking to add even more visibility to your front turn signals utilizing aftermarket LED lights or Fang lights? No problem, simply take our wire and connect it to your favorite front turn signal LED lights.
A combination hazard / horn rocker switch saves space in your dash while maintaining all the bells and whistles.
A loud throaty automotive style horn is included. This is no beep-beep toy sounding ATV or Motorcycle horn that you find on many other kits on the market folks! It is a legit auto/truck horn with a deep tone that will put many car horns to shame!
All plug and play. Everything plugs together.
Only 3 connections to the vehicle: 12v+ (battery) 12v+ keyed (ignition) 12v- (ground)
Specifications
MADE IN THE USA
Installation
Installation times will vary based on your familiarity with the vehicle. A beginner could plan on spending 5 hours on the install while an installer could plan on 20 to 30 minutes.
Painfully simple to install. All components terminated with connectors allowing for full plug and play operation.
Rear T harness plugs into the left and right tail lights to utilizes the rear brake lights as turn signals feeds from rear of machine through tunnel and up into hood compartment where it feeds through firewall into dash and plugs into the turn signal switch. A complete front end harness with sealed LED lights feeds through firewall into dash and also plugs into the turn signal switch. This harness also includes wires for the horn allowing easy connection of the horn.
Photos
Description
MCSADVENTURES Rocker turn signal & horn kit
Rocker switches snap into .83 X 1.48 cutout
Plug and Play utilizing factory brake lights
Fits 2013+ Ranger 500, 570 and 900
Fits 2017 Ranger 1000
Fits 2018 Ranger 1000 crew
Check tail light plugs to verify fitment
Extended length harness fits 2 and 4 seat models
Stick on LED strip lights for front turn signals
Looking for a true plug and play way to add turn signals to your Ranger or General that utilizes the factory tail lights?
We've designed a great plug n play solution at a very reasonable price.
Compatibility
Polaris Ranger
2017 Ranger 1000
2018 Ranger 1000 CREW
2014-2025 Ranger 570
2014 Ranger 800
2014-2019 Ranger 900
Polaris Ranger
2017 Ranger 1000
2018 Ranger 1000 CREW
2014-2025 Ranger 570
2014 Ranger 800
2014-2019 Ranger 900
Kits compatible with all trim levels and both 2 and 4 seat models unless otherwise noted.