2024-12-02 We are conducting maintenance on the website shopping cart. This may limit the ability to place an order. Call to place an order.
MCS ADVENTURES
Quality UTV accessories from Advance MCS Electronics. with free 2-3 day shipping to most locations in the lower 48 states. Most orders ship the following business day and arrive in 2-3 days.877-349-5891Dealer login
Carling Contura Series switches match the factory switches on many vehicles. The green backlights in the switch also function as turn indicators.
Adjustable Flasher Relay
Flasher relay with adjustable flash rate. Use the dial to adjust the flash rate. This flasher (CF3) can be replaced with the non adustable EP34 in a pinch.
Installation: the relay should be mounted away from water. It is best to zip tie a plastic bag around the relay if you powerwash the interior of your vehicle.
Dash cluster tie-in
If you have the instrument cluster pictured, you may wish to utilize our cluster tie-in kit to utilize the indicator arrows in your OEM gauge. Simply snap the pins from our harness into the factory plug housing. Note: may not be compatible with all machines even with this cluster (example: 2018 Ranger won't work). If you choose to utilize this feature, a complete test should be performed with machine off and machine running prior to installation. Most issues with installing the cluster harness can be solved by pressing the harness pins further into the housing. The pins may click before they are fully seated.
Green led indicators are included for those unable to take advantage of the cluster tie-in. more info here
Rear tail light tie-in harness
Rear T-Harness adds rear turn signal functionality to the factory tail lights. The harness Ts into the factory harness above the clutch cover. . Your vehicle needs to have the 4 pin plug shown in the photos below.
Accessory power plug tie-in
For vehicles equipped with an accessory power bar. This power plug can be attached to the turn signal kit harness using the provided connectors.
Features
Kit is comprised of a main control module harness with front turn signal wires. This main control module mates to our custom rear T harness to utilize the oem brake lights as turn signals.
Rocker switch harness is prewired into the main control module and simply plugs onto the back of the rocker switch. No fumbling with wires and QD connectors.
Green illuminated Left / Right rocker lights up with key on and also flashes when selected thus indicating direction.
Includes optional instrument cluster integration for machines with the instrument cluster shown.
A custom rear T harness plugs into factory tail light harness and converts facotory brake lights for use as brake AND turn signals. We also supply a license plate light pigtail that can activate your license plate light with key on.
Looking to add even more visibility to your front turn signals utilizing aftermarket LED lights or Fang lights? No problem, simply take our wire and connect it to your favorite front turn signal LED lights.
All plug and play. Everything plugs together.
Only 2 connections to the vehicle: 12v+ keyed (ignition) 12v- (ground)
Specifications
MADE IN USA
Installation
Installation times will vary based on your familiarity with the vehicle. A beginner could plan on spending 5 hours on the install while an installer could plan on 20 to 30 minutes.
Fits many 19+ Polaris Ranger 1000 (non ride command) and all year General with 4 pin tail light bed plug. Extended harness fits both 2 and 4 seat units This kit ONLY fits machines with the 4 pin plug!
Check bed-to-frame plug at top rear of frame under the bed to verify fitment.
This is the center connection where both left and right tail lights come together near center of the rear frame area of machine. NOT THE PLUG AT THE ACTUAL TAIL LIGHTS!
On Ranger and General models, lift bed to examine top rear driver side frame area.
A pulse harness is also included for easy installation on newer machines with the pulse power bar.
Painfully simple to install. All components terminated with connectors allowing for full plug and play operation.
Rear T harness utilizes the rear brake lights as turn signals feeds from rear of machine through tunnel and up into hood compartment where it feeds through firewall into dash and plugs into the control module.
Photos
Description
MCSADVENTURES Rocker turn signal kit
Rocker switch snaps into .83 X 1.48 cutout
Plug and Play utilizing factory brake lights
Fits many Polaris 19+ Ranger 1000 non ride command and all year General models WITH the 4 pin plug
*****This kit only fits machines with the 4 pin bed to chassis plug*****
Extended length harness fits 2 and 4 seat models
Includes Pulse bar harness for newer 2019+ machines.
Headlight accent tube lights for front turn signals
!!Must have the 4 pin plug shown in picture on top of engine under the bed!!
This is the center connection where both left and right tail lights come together near center of the rear frame area of machine. NOT THE PLUG AT THE ACTUAL TAIL LIGHTS!
*****check your machineto verify fitment by looking for the bed-to-frame tail light harness plug located near the top rear frame on top of the engine underneath the bed*****
Looking for a true plug and play way to add turn signals to your Ranger or General that utilizes the factory tail lights?
We've designed a great plug n play solution at a very reasonable price.
Compatibility
Polaris General
2016-2024 General 1000
Polaris General
2016-2024 General 1000
Kits compatible with all trim levels and both 2 and 4 seat models unless otherwise noted.