MCS ADVENTURES Product Details

MCSADVENTURES plug and play turn signal kit for Polaris General: Lever switch: (black), hazard, fang lights (clear lens)

63612: MCSADVENTURES plug and play turn signal kit for Polaris General: Lever switch: (black), hazard, fang lights (clear lens)

Kit Finder

Kit: m63612 This items ships to the US lower 48 for $0.00. US shipping: $0.00. Shipping is only available to the USA Only ships to the USA

Pricing
Quantity	1
Price	$295.00
Applied

Plug and play installation
Uses factory tail lights
Includes power plug for Polaris
Includes in-dash indicator harness
Fang lights mount through the grill with no drilling

power harness

Kit Diagram

Dash indicator connection info

Add on accessories

Trailer Plug harness

m62724

To be purchased at the same time as a plug and play kit. The kit will be custom built to include a 4-pin trailer plug connection at the rear.

$26.95

Daytime running lights

m63376

Allows SINGLE COLOR front turn signals to also function as running lights. (Not needed for front lights with built in DRL function)

$25.99

Whip light harness

m63694

To be installed with a plug and play kit. Adds a connection for auxillary turn signals such as whip lights, mirrors etc. Plug and play installation.

$16.95

Dash Plug tool

m63728

OPTIONAL: For those who plan to use the in-dash indicators, this tool aids in the disassembly of the dash cluster plug.

$9.99

Parts

Shop

Kit features

Cluster tie in

Power harness

Links

Replacement Parts

Part number cross reference

Components:

Front lights: Fang lights

These front fang lights include white running lights and amber lights that are uses as turn indicators. Mounting Tabs hold the lights to the back of the factory grill. Connect the included power harness to 12v+ keyed ignition and to 12v- ground. Plug the turn wire into the front turn signal harness.

Column mounted lever switch- black

Black lever switch with hazard function

Adjustable Flasher Relay

Flasher relay with adjustable flash rate. Use the dial to adjust the flash rate. This flasher (CF3) can be replaced with the non adustable EP34 in a pinch. Installation: the relay should be mounted away from water. It is best to zip tie a plastic bag around the relay if you powerwash the interior of your vehicle.

Dash cluster tie-in

If you have the instrument cluster pictured, you may wish to utilize our cluster tie-in kit to utilize the indicator arrows in your OEM gauge. Simply snap the pins from our harness into the factory plug housing. Note: may not be compatible with all machines even with this cluster (example: 2018 Ranger won't work). If you choose to utilize this feature, a complete test should be performed with machine off and machine running prior to installation. Most issues with installing the cluster harness can be solved by pressing the harness pins further into the housing. The pins may click before they are fully seated. Green led indicators are included for those unable to take advantage of the cluster tie-in. more info here

Rear tail light tie-in harness

Rear T-Harness adds rear turn signal functionality to the factory tail lights. The harness Ts into the factory harness above the clutch cover. . Your vehicle needs to have the 4 pin plug shown in the photos below.

Accessory power plug tie-in

For vehicles equipped with an accessory power bar. This power plug can be attached to the turn signal kit harness using the provided connectors.

Features

Column mounted switch maintains a natural feel and installs much easier than rocker or toggle switches. Futhermore it does not require switch holes in your dash. Hazard (4way) feature is built right into the switch. This is a beefy metal body switch....not a painted plastic unit!

Includes optional instrument cluster integration for machines with the instrument cluster shown.

2 plug and play harness assemblies complete the kit.

Uses factory rear brake lights and converts them for use as brake AND turn signal just like many automobiles.

Replacement front fang lights add turn function

Specifications

MADE IN THE USA

Installation

Installation times will vary based on your familiarity with the vehicle. A beginner could plan on spending 5 hours on the install while an installer could plan on 20 to 30 minutes.

Lift bed to locate the 4 pin plug on rear driver side frame area.

Lever switch simply mounts to steering column to retain natural feel.

Painfully simple to install. All components terminated with connectors allowing for full plug and play operation.

A 3 pin power harness is included that is compatible with the Polaris Pulse power bar found on some newer models.

Rear T harness utilizes the rear brake lights as turn signals feeds from rear of machine through tunnel and up into hood compartment where it feeds through firewall into dash and plugs into the turn signal switch.

Total kit install time approx 1 hour.

Photos

Description

MCSADVENTURES turn signal kit with replacement fang lights

Plug and Play utilizing factory brake lights

Fits all year Polaris General models

Extended length harness fits 2 and 4 seat models

Includes Pulse bar harness for newer 2019+ machines.

Led switchback grille accent lights illuminate white with key on includes amber turn function

Looking for a true plug and play way to add turn signals to your General that utilizes the factory tail lights?

We've designed a great plug n play solution at a very reasonable price.

Front accent light kit for Polaris General models

White illumination with key on

Flashes amber when turn selected

Power harness included

Painfully simple to install in just a few minutes

ZERO holes to drill

Connect the yellow fuse holder to a 12v+ key on power source

Connect the black wire to ground

Plug the lights in via the included harness.

Each remaining single yellow wire on the lights should connect to the signal wire coming from the turn signal kit. Once installed and connected correctly, the lights should illuminate white with key on and flash amber when a turn is selected.

MCS ADVENTURES

Search by part number: