Universal UTV turn signal kit
Lighted rocker switch fits into industry standard cutout (.83"x1.48")
Built-in amber LED indicators
Round Led lights fit into 3/4" diameter hole
Custom harness prewired onto switch for easy install
Only 2 connections to vehicle required for operation: 12v+ keyed ignition, 12v-(ground)
This universal turn signal kit fits many modern UTV, golf carts and side by side vehicles. Kit includes LED lights for all 4 corners of the vehicle and is designed to operate independently from OEM lights ensuring no need to worry about splicing into factory wiring.
Customized rocker switch utilizes built in amber led indicators that illuminate with key on and also flash with corresponding turn signal.
Prewired harness plugs onto rocker switch for easy install.
Amber lighted rocker switch illuminates with key on and also flashes when selected indicating direction.
4- amber LED lights for the front (Black wire =positive White wire= negative)
4-red LED lilghts for the rear (Black wire =positive White wire= negative)
Adjustable flasher relay
40 feet of matching color coded black/white bonded wire for the LED lights
MADE IN THE USA
Rocker switch fits into .83 x 1.46 cutout.
Electrical 101: Ok so you've seen some kits out there that have random parts thrown into a package by someone with zero electrical knowledge leaving it up to you to figure out how to make it all work. This is NOT one of those!
This kit incorporates a pre-wired harness labeled and ready to install. Anyone with a little basic electrical common sense can install this kit in about an hour.
Again, no guessing as to what wire goes where or how to plug wires onto what terminal of the rocker switch.
It's all pre-wired!
It's as simple as this:
There are 2 SETS of marked wires on the harness: LEFT & RIGHT
These wire sets match the colors of the wires on the LED lights.
Run a wire to each corner of the vehicle where you'll butt it to the LED lights.
Connect the Left LED's to the harness marked LEFT
Connect the Right LED's to the harness marked RIGHT
Only 2 connections to vehicle required for operation: 12v+ keyed ignition, 12v-(ground)
That's it. DONE!
Dealers: contact us for bulk pricing. Dealer pricing will be shown after logging in.
Questions? Call us at: 877-349-5891 or email us: info@advancemcs.com