Components:

Front lights: 3/4 LED Recessed (clear lens, amber light)

3/4" Recessed Bullet LED Light - Amber Lens / Amber Light. Most of our kits ship with 3 lights per side which allows for a light to be installed around to the side for maximum visiblity.

Dash mounted rocker switch - green backlight

Carling Contura Series switches match the factory switches on many vehicles. The green backlights in the switch also function as turn indicators.

Adjustable flasher relay

Flasher relay with adjustable flash rate. Use the dial to adjust the flash rate. This flasher (CF3) can be replaced with the non adustable EP34 in a pinch. Installation: the relay should be mounted away from water. It is best to zip tie a plastic bag around the relay if you powerwash the interior of your vehicle.

Automotive style horn

Loud automotive style horn. 105db, 410hz.

Rear tail light tie-in harness

Rear T-Harness adds rear turn signal functionality to the factory tail lights. The harness Ts into the factory harness at each rear of the vehicle. Your vehicle needs a matching plug as shown in the photos below.

Features

Kit is comprised of a main control module harness which connects to 2 sub harnesses.

Rocker switch harnesses are prewired into the main control module and simply plug onto the back of the rocker switch.

Lighted Left / Right rocker lights up with key on and also flashes when selected thus indicating direction. A pair of optional green LED chrome panel mount indicators are also included.

A custom rear T harness plugs into factory tail light harness and converts facotory brake lights for use as brake AND turn signals. We also supply a license plate light pigtail that can activate your license plate light with key on.

Front indicators (3 per side) mount into a 3/4" diameter hole to provide a clean oem appearance.

A combination hazard / horn rocker switch saves space in your dash while maintaining all the bells and whistles.

A loud throaty automotive style horn is included. This is no beep-beep toy sounding ATV or Motorcycle horn that you find on many other kits on the market folks! It is a legit auto/truck horn with a deep tone that will put many car horns to shame!

Power is supplied via a plug and play 2 pin connector located on the driver side under hood.

All plug and play. Everything plugs together.

Specifications

Installation

Installation times will vary based on your familiarity with the vehicle. A beginner could plan on spending 5 hours on the install while an installer could plan on 20 to 30 minutes.

Painfully simple to install. All components terminated with connectors allowing for full plug and play operation.

Description

MCSADVENTURES Rocker turn signal & horn kit

Rocker switches snap into .83 X 1.48 cutout

Plug and Play utilizing factory brake lights

Custom rear harness plugs into connection located on the driver side frame behind access panel in the bed.

Fits 19-21 Honda Talon (will not fit any other model years)

Green illuminated rocker switches

Hazard horn combo switch saves valuable dash space

6 Clear lens waterproof bullet LED lights (amber illumination)

Looking for a true plug and play way to add turn signals to your Honda Talon  that utilizes the factory tail lights?

We've designed a great plug n play solution at a very reasonable price.