MCS ADVENTURES Product Details

MCSADVENTURES plug and play turn signal kit for 13+ Ranger 500/570/900: Rocker switch (green), sequential bar lights (white lens) and 3/4 lights (clear lens)

63233: MCSADVENTURES plug and play turn signal kit for 13+ Ranger 500/570/900: Rocker switch (green), sequential bar lights (white lens) and 3/4 lights (clear lens)

Kit Finder

Kit: m63233 This items ships to the US lower 48 for FREE. US shipping: FREE. Shipping is only available to the USA Only ships to the USA

Pricing
Quantity	1
Price	$239.00
Applied

Out of stock

Plug and play installation
Uses factory tail lights
Sequential front signals include daytime running lights

vertical rocker

Kit Diagram

Add on accessories

Trailer Plug harness

m62724

To be purchased at the same time as a plug and play kit. The kit will be custom built to include a 4-pin trailer plug connection at the rear.

$26.95

Daytime running lights

m63377

Allows SINGLE COLOR front turn signals to also function as running lights. (Not needed for front lights with built in DRL function)

$25.99

Whip light harness

m63694

To be installed with a plug and play kit. Adds a connection for auxillary turn signals such as whip lights, mirrors etc. Plug and play installation.

$16.95

Parts

Shop

Kit features

Turn Switch

Front Lights

Links

Replacement Parts

Part number cross reference

Components:

Front lights: 3/4 LED Recessed (clear lens, amber light)

3/4" Recessed Bullet LED Light - Amber Lens / Amber Light. Most of our kits ship with 3 lights per side which allows for a light to be installed around to the side for maximum visiblity.

Front lights: No-drill with sequential turn

No-drill front indicators with sequential turn function. Lights mount with all weather adhesive.

Dash mounted rocker switch - green backlight

Carling Contura Series switches match the factory switches on many vehicles. The green backlights in the switch also function as turn indicators.

Adjustable Flasher Relay

Flasher relay with adjustable flash rate. Use the dial to adjust the flash rate. This flasher (CF3) can be replaced with the non adustable EP34 in a pinch. Installation: the relay should be mounted away from water. It is best to zip tie a plastic bag around the relay if you powerwash the interior of your vehicle.

Rear tail light tie-in harness

Rear T-Harness adds rear turn signal functionality to the factory tail lights. The harness Ts into the factory harness at each rear tail light. Your vehicle needs to have tail lights with the 3 pin plug shown in the photos below.

Features

Kit is comprised of a main control module harness which connects to 2 sub harnesses.

Rocker switch harnesses are prewired into the main control module and simply plug onto the back of the rocker switch. No fumbling with qd terminals.

Green illuminated Left / Right rocker lights up with key on and also flashes when selected thus indicating direction.

A custom rear T harness plugs into the left and right factory tail lights and converts the factory brake lights for use as brake AND turn signals. We also supply a license plate light pigtail that can activate your license plate light with key on.

Looking to add even more visibility to your front turn signals utilizing aftermarket LED lights? No problem, simply take our wire and connect it to your favorite front turn signal LED lights.

All plug and play. Everything plugs together.

Only 2 connections to the vehicle: 12v+ keyed (ignition) 12v- (ground)

Specifications

MADE IN USA

Installation

Installation times will vary based on your familiarity with the vehicle. A beginner could plan on spending 5 hours on the install while an installer could plan on 20 to 30 minutes.

Painfully simple to install. All components terminated with connectors allowing for full plug and play operation.

Rear T harness plugs into the left and right tail lights utilizing the rear brake lights as turn signals. This custom harness feeds from the rear of machine through tunnel and up into hood compartment where it feeds through firewall into dash and plugs into the control module

A complete front end harness is preassembled with rocker switch base, flasher relay, and control module. Front turn signal wires feed through the firewall up to front of vehicle where they connect to sealed LED lights.

For power only 2 connections to the machine are required: 12v+ keyed ignition 12v-ground

Total install time: approx 1 hour

Photos

Description

MCSADVENTURES Rocker turn signal kit

Fits 2013+ Ranger 500, 570, 900

2017 Ranger 1000 with 3pin tail light plugs

2018 Ranger 1000 crew

(check tail lights on machine to verify fitment)

Rocker switch snaps into .83 X 1.48 cutout

Plug and Play utilizing factory brake lights

Custom rear T harness plugs into the left and right tail light harness

Extended length harness fits 2 and 4 seat models

Stick on LED strip lights for front turn signals

Looking for a true plug and play way to add turn signals to your 2013-2018 Polaris Ranger 570, 900 or 1000 that utilizes the factory tail lights?

We've designed a great plug n play solution at a very reasonable price.

Compatibility

Polaris Ranger

2017 Ranger 1000

2018 Ranger 1000 CREW

2014-2025 Ranger 570

2014 Ranger 800