Components:

Front lights: NONE (front harness included)

No front indicator lights included with this kit. You can connect the included wiring harness to your front indicators.

Adjustable flasher relay

Flasher relay with adjustable flash rate. Use the dial to adjust the flash rate. This flasher (CF3) can be replaced with the non adustable EP34 in a pinch. Installation: the relay should be mounted away from water. It is best to zip tie a plastic bag around the relay if you powerwash the interior of your vehicle.

Rear tail light tie-in harness

Rear T-Harness adds rear turn signal functionality to the factory tail lights. The harness Ts into the factory harness at each rear of the vehicle. Your vehicle needs a matching plug as shown in the photos below.

Features

Kit is comprised of a main control module harness with front turn signal wires. This main control module mates to our custom rear T harness to utilize the oem brake lights as turn signals.

Rocker switch harness is prewired into the main control module and simply plugs onto the back of the rocker switch. No fumbling with wires and QD connectors.

Blue illuminated Left / Right rocker lights up with key on and also flashes when selected thus indicating direction.

A custom rear T harness plugs into factory tail light harness and converts facotory brake lights for use as brake AND turn signals. We also supply a license plate light pigtail that can activate your license plate light with key on.

No front indicators included: wire harness only

Looking to add even more visibility to your front turn signals utilizing aftermarket LED lights or Fang lights? No problem, simply take our wire and connect it to your favorite front turn signal LED lights.

All plug and play. Everything plugs together.

Only 3 connections to the vehicle:   12v+ batt    12v+ keyed (ignition)      12v- (ground)

Specifications

MADE IN USA

Installation

Installation times will vary based on your familiarity with the vehicle. A beginner could plan on spending 5 hours on the install while an installer could plan on 20 to 30 minutes.

Fits Honda Talon

Painfully simple to install. All components terminated with connectors allowing for full plug and play operation.

Rear T harness utilizes the rear brake lights as turn signals and easily feeds from rear of machine through tunnel and up into hood compartment where it feeds through firewall into dash and plugs into the control module.

Photos

Description

MCSADVENTURES Rocker turn signal kit

Rocker switch snaps into .83 X 1.48 cutout

Plug and Play utilizing factory brake lights

Fits Honda Talon

Extended length harness fits 2 and 4 seat models

No front indicators included: wire harness only

Looking for a true plug and play way to add turn signals to your Honda Talon that utilizes the factory tail lights?

We've designed a great plug n play solution at a very reasonable price.