2024-09-12 We are conducting maintenance on the website shopping cart. This may limit the ability to place an order. Call to place an order.
MCS ADVENTURES
Quality UTV accessories from Advance MCS Electronics. with free 2-3 day shipping to most locations in the lower 48 states. Most orders ship the following business day and arrive in 2-3 days.877-349-5891Dealer login
Front lights: 3/4 LED Recessed (clear lens, amber light)
3/4" Recessed Bullet LED Light - Amber Lens / Amber Light. Most of our kits ship with 3 lights per side which allows for a light to be installed around to the side for maximum visiblity.
Dash mounted rocker switch - green backlight
Carling Contura Series switches match the factory switches on many vehicles. The green backlights in the switch also function as turn indicators.
Adjustable Flasher Relay
Flasher relay with adjustable flash rate. Use the dial to adjust the flash rate. This flasher (CF3) can be replaced with the non adustable EP34 in a pinch.
Installation: the relay should be mounted away from water. It is best to zip tie a plastic bag around the relay if you powerwash the interior of your vehicle.
Rear tail light tie-in harness
Rear T-Harness adds rear turn signal functionality to the factory tail lights. The harness Ts into the factory harness at each rear of the vehicle. Your vehicle needs a matching plug as shown in the photos below.
Features
Kit is comprised of a main control module harness with front turn signal wires. This main control module mates to our custom rear T harness to utilize the oem brake lights as turn signals.
Rocker switch harness is prewired into the main control module and simply plugs onto the back of the rocker switch. No fumbling with wires and QD connectors.
Green illuminated Left / Right rocker lights up with key on and also flashes when selected thus indicating direction.
A custom rear T harness plugs into factory tail light harness and converts facotory brake lights for use as brake AND turn signals. We also supply a license plate light pigtail that can activate your license plate light with key on.
Front indicators (2 per side) mount into a 3/4" diameter hole to provide a clean oem appearance.
Looking to add even more visibility to your front turn signals utilizing aftermarket LED lights or Fang lights? No problem, simply take our wire and connect it to your favorite front turn signal LED lights.
All plug and play. Everything plugs together.
Only 2 connections to the vehicle: 12v+ keyed (ignition) 12v- (ground)
Specifications
MADE IN USA
Installation
Installation times will vary based on your familiarity with the vehicle. A beginner could plan on spending 5 hours on the install while an installer could plan on 20 to 30 minutes.
Fits Honda Talon
Painfully simple to install. All components terminated with connectors allowing for full plug and play operation.
Rear T harness utilizes the rear brake lights as turn signals and easily feeds from rear of machine through tunnel and up into hood compartment where it feeds through firewall into dash and plugs into the control module.
Photos
Description
MCSADVENTURES Rocker turn signal kit
Rocker switch snaps into .83 X 1.48 cutout
Plug and Play utilizing factory brake lights
Fits Honda Talon
Extended length harness fits 2 and 4 seat models
clear / amber front indicators
Looking for a true plug and play way to add turn signals to your Honda Talon that utilizes the factory tail lights?
We've designed a great plug n play solution at a very reasonable price.
Compatibility
Honda Talon
2019-2021 Talon 1000
Honda Talon
2019-2021 Talon 1000
Kits compatible with all trim levels and both 2 and 4 seat models unless otherwise noted.