Components:

Front lights: 3/4 LED Recessed (clear lens, amber light)

3/4" Recessed Bullet LED Light - Amber Lens / Amber Light. Most of our kits ship with 3 lights per side which allows for a light to be installed around to the side for maximum visiblity.

Front lights: Bolt On LED (clear lens, amber light)

Bolt on style LED strip. Clear lens with amber light. Can be bolted on or installed through the grill.

Dash mounted rocker switch - green backlight

Carling Contura Series switches match the factory switches on many vehicles. The green backlights in the switch also function as turn indicators.

Adjustable flasher relay

Flasher relay with adjustable flash rate. Use the dial to adjust the flash rate. This flasher (CF3) can be replaced with the non adustable EP34 in a pinch. Installation: the relay should be mounted away from water. It is best to zip tie a plastic bag around the relay if you powerwash the interior of your vehicle.

Dash cluster tie-in

If you have a compatible instrument cluster, you may wish to utilize our cluster tie-in kit to utilize the indicator arrows in your OEM gauge. Simply snap the pins from our harness into the factory plug housing. Note: machines may have a compatible cluster (example: 2018 Ranger won't work). If you choose to utilize this feature, a complete test should be performed with machine off and machine running prior to installation. Most issues with installing the cluster harness can be solved by pressing the harness pins further into the housing. The pins may click before they are fully seated. Green led indicators are included for those unable to take advantage of the cluster tie-in. more info here

Rear tail light tie-in harness

Rear T-Harness adds rear turn signal functionality to the factory tail lights. The harness Ts into the factory harness above the clutch cover. . Your vehicle needs to have the 4 pin plug shown in the photos below.

Features

Kit is comprised of a main control module harness with front turn signal wires. This main control module mates to our custom rear T harness to utilize the oem brake lights as turn signals.

Rocker switch harness is prewired into the main control module and simply plugs onto the back of the rocker switch. No fumbling with wires and QD connectors.

Green illuminated Left / Right rocker lights up with key on and also flashes when selected thus indicating direction.

A custom rear T harness plugs into factory tail light harness and converts facotory brake lights for use as brake AND turn signals. We also supply a license plate light pigtail that can activate your license plate light with key on.

Looking to add even more visibility to your front turn signals utilizing aftermarket LED lights or Fang lights? No problem, simply take our wire and connect it to your favorite front turn signal LED lights.

All plug and play. Everything plugs together.

Only 2 connections to the vehicle:      12v+ keyed (ignition)      12v- (ground)

Specifications

MADE IN USA

Installation

Installation times will vary based on your familiarity with the vehicle. A beginner could plan on spending 5 hours on the install while an installer could plan on 20 to 30 minutes.

Fits 15-18 RZR 900, 1000xp, xp Turbo
This kit ONLY fits machines with the 4 pin plug!  Check bed-to-frame plug at top rear of frame under the bed to verify fitment. This is the center connection where both left and right tail lights come together near center of the rear frame area of machine. NOT THE PLUG AT THE ACTUAL TAIL LIGHTS!

Painfully simple to install. All components terminated with connectors allowing for full plug and play operation.

Rear T harness utilizes the rear brake lights as turn signals and easily feeds from rear of machine through tunnel and up into hood compartment where it feeds through firewall into dash and plugs into the control module.

Description

MCSADVENTURES Rocker turn signal kit

Rocker switch snaps into .83 X 1.48 cutout

Plug and Play utilizing factory brake lights

Fits 2015-2018 RZR 900, 1000, xp Turbo

May not fit Dynamix or Ride Command

*****Must have 4 pin bed to chassis plug located above rear portion of clutch cover*****

Extended length harness fits 2 and 4 seat models

Bolt on LED strip lights for front turn signals

Looking for a true plug and play way to add turn signals to your 15-18 RZR that utilizes the factory tail lights?

We've designed a great plug n play solution at a very reasonable price.