Components:

Front lights: Bumper lights

Bumper Lights for 1500HD Style Bumpers (including 2025 Ranger 1000XP) These lights feature LED running lights and sequential turn signals. This kit includes a dash mounted ON/OFF switch for the white running lights.

Carling 'L' Series L/R Rocker Switch - blue backlight

Carling 'L' Series switches match the factory switches in 18+ Rangers. The blue backlights in the switch also function as turn indicators.

Adjustable flasher relay

Flasher relay with adjustable flash rate. Use the dial to adjust the flash rate. This flasher (CF3) can be replaced with the non adustable EP34 in a pinch. Installation: the relay should be mounted away from water. It is best to zip tie a plastic bag around the relay if you powerwash the interior of your vehicle.

Dash cluster tie-in

If you have a compatible instrument cluster, you may wish to utilize our cluster tie-in kit to utilize the indicator arrows in your OEM gauge. Simply snap the pins from our harness into the factory plug housing. Note: machines may have a compatible cluster (example: 2018 Ranger won't work). If you choose to utilize this feature, a complete test should be performed with machine off and machine running prior to installation. Most issues with installing the cluster harness can be solved by pressing the harness pins further into the housing. The pins may click before they are fully seated. Green led indicators are included for those unable to take advantage of the cluster tie-in. more info here

Rear tail light tie-in harness

Rear T-Harness adds rear turn signal functionality to the factory tail lights. The harness Ts into the factory harness at each rear tail light. Your vehicle needs to have tail lights with the 4 pin plug shown in the photos below.

Selectable power source

Power Source Options This exclusive option from MCSADVENTURES gives you the flexibility to choose how your turn signals operate, tailoring them to your specific needs. You can configure your signals to function only when the key is turned on, or alternatively, enable them to work even when the key is off. For instance, you might prefer to restrict signal functionality to when the key is on to prevent accidental battery drain in case a signal is left active. However, there are situations where you may need the signals to work without the key, such as leaving your vehicle parked along a road with the hazard lights on for added safety. This option empowers you to easily switch between these two modes, ensuring convenience and peace of mind in any scenario. At MCSADVENTURES, options are mandatory.

Features

This kit was born out of necessity. Specifically, on many late model Polaris Ranger models, the rocker switch holes on the left side of the dash may come pre punched making it near impossible to fit aftermarket sized switches into these locations.

Problem solved:   We utilize a Genuine Carling rocker switch matching the OEM switches already on the machine. These large robust switches snap right into the OEM knockout of 1.73 x .86

Not only do you get a great looking switch, the feel and function of the switch is 2nd to none. Simply put, this is how a rocker switch is supposed to feel.

Our kit consists of 2 main harnesses: 

A front harness for the switch and control module.

A  rear T harness that plugs into each tail light and feeds through tunnel to plug into the front harness.

Rocker switch harness is prewired into the main control module and simply plugs onto the back of the rocker switch. No fumbling with qd terminals or guessing what wire goes where. It simply plugs in.

Blue illuminated Left / Right rocker lights up with key on and also flashes when selected thus indicating direction.

Includes optional instrument cluster integration for machines with the instrument cluster shown.

Uses factory brake lights and converts them for use as brake AND turn signal just like many automobiles. Rear harness has a license plate tag light power feed. (license plate mount and light NOT included) Many areas don't require license plates. The areas that do, can have varying sizes of plates issued. Additionally, we feel it's better to allow customers to choose their own unique plate mount and light which are readily available. Not all of us are Bears fans!!

All plug and play. Everything plugs together.

No cutting or splicing. You simply plug it in!

Specifications

Always consult your local and State laws if you intend to utilize this kit to make your machine street legal. Depending on the laws in your area this kit may or may not comply with street legal requirements.

Installation

Installation times will vary based on your familiarity with the vehicle. A beginner could plan on spending 5 hours on the install while an installer could plan on 20 to 30 minutes.

Painfully simple to install. All components terminated with connectors allowing for full plug and play operation.

Rear T harness plugs into the left and right tail lights utilizing the rear brake lights as turn signals. This custom harness then feeds from the rear of machine through tunnel and up into hood compartment where it feeds through firewall into dash and plugs into the turn signal switch.

A complete front end harness feeds through firewall into dash and also plugs into the turn signal switch. 

For power, simply plug in the power plug to the OEM bus bar if equiped or utilize the included adapter with standard ring terminals.

Total install time approx 1 hour.

Description

MCSADVENTURES turn signal kit

Plug n Play harness plugs into the left and right tail lights utilizing factory brake lights

Fits 2025+ Polaris Ranger 1000 XP  (will NOT fit waterfowl edition which utilizes a different bumper)

Extended length harness fits 2 and 4 seat models

Switchback bumper lights simply mount to existing mounting tabs on bumper with 3 screws (included)

Custom harness with L series illuminated rocker switch (activates the bumper lights white)

Sequential flowing amber signal feature activates when turn selected

(signals operate regardless if bumper light switch is on or off)

Backlit OEM L series turn signal switch

Unique custom surround gasket included (makes for clean finish hiding gap around light)

Possibly the cleanest, fastest, and most polished way to get signals on the front of 2025 XP 1000 models.

Thinking of adding a hazard function and a horn later down the road?  No problem! We've designed this system to accomodate.  This harness is prewired with a connector ready to accept our combination hazard/horn kit available separately.