Components:

Front lights: Replacement fang lights with smoked lens

These replacement front fang lights include amber lights that are uses as turn indicators. The running light wires connect to the factory fang harness. The turn function plugs into our turn signal harness.

Dash mounted rocker switch - orange backlight

Carling Contura Series switches match the factory switches on many vehicles. The orange backlights in the switch also function as turn indicators.

Adjustable flasher relay

Flasher relay with adjustable flash rate. Use the dial to adjust the flash rate. This flasher (CF3) can be replaced with the non adustable EP34 in a pinch. Installation: the relay should be mounted away from water. It is best to zip tie a plastic bag around the relay if you powerwash the interior of your vehicle.

Automotive style horn

Loud automotive style horn. 105db, 410hz.

Dash cluster tie-in

If you have a compatible instrument cluster, you may wish to utilize our cluster tie-in kit to utilize the indicator arrows in your OEM gauge. Simply snap the pins from our harness into the factory plug housing. Note: machines may have a compatible cluster (example: 2018 Ranger won't work). If you choose to utilize this feature, a complete test should be performed with machine off and machine running prior to installation. Most issues with installing the cluster harness can be solved by pressing the harness pins further into the housing. The pins may click before they are fully seated. Green led indicators are included for those unable to take advantage of the cluster tie-in. more info here

Rear tail light tie-in harness

Rear T-Harness adds rear turn signal functionality to the factory tail lights. The harness Ts into the factory harness at each rear tail light. Your vehicle needs to have tail lights with the 4 pin plug shown in the photos below.

Accessory power plug tie-in

No wiring hassle — the Pulse Plug connects straight to the Polaris Pulse Bar to power your turn signal system.

Features

Kit is comprised of a complete switch/control module front harness which connects to a rear T harness.

Rocker switch harnesses are prewired into the main control module and simply plug onto the back of the rocker switch. No fumbling with qd terminals.

Amber illuminated Left / Right rocker lights up with key on and also flashes when selected thus indicating direction.

Includes optional instrument cluster integration for machines with the instrument cluster shown.

Front fang lights quickly mount in place of the factory plastic fang accent blanks and plug into factory connector on the machine. Each fang light has a 3rd wire prepped with a connector ready to plug into the harness to provide turn signal function. No splicing or crimping wires. It simply all plugs together.

A custom rear T harness plugs into the left and right factory tail lights and converts the factory brake lights for use as brake AND turn signals. We also supply a license plate light pigtail that can activate your license plate light with key on.

Combo hazard/horn saves space on your dash while retaining all the bells and whistles. Hazard and horn function even with key off. An automotive horn is included. This is no beep-beep scooter horn folks. This is a loud deep throaty horn that sounds like it belongs on a truck.

Specifications

Installation

Installation times will vary based on your familiarity with the vehicle. A beginner could plan on spending 5 hours on the install while an installer could plan on 20 to 30 minutes.

Painfully simple to install. All components terminated with connectors allowing for full plug and play operation.

Rear T harness plugs into the left and right tail lights utilizing the rear brake lights as turn signals. This custom harness feeds from the rear of machine through tunnel and up into hood compartment where it feeds through firewall into dash and plugs into the control module

Front fang lights quickly mount in place of the factory plastic fang accent blanks and plug into factory connector on the machine. Each fang light has a 3rd wire prepped with a connector ready to plug into the harness to provide turn signal function. No splicing or crimping wires. It simply all plugs together.

A complete front end harness feeds through firewall into dash and also plugs into the control module.

For power only 3 connections to the machine are required:  12v+ batt    12v+  keyed ignition    12v-ground

A pulse power harness is included for machines with the pulse power bar.

Total install time:  approx 1 hour

Description

MCSADVENTURES Rocker turn signal & horn kit with front fang lights

Fits 19+ RZR xp1000 and 19-21 Turbo

Fits 18-21 RZR Turbo S

Will also fit many 2021+ RZR Trail and Trail S models

Rocker switch snaps into OEM sized .83 X 1.48 cutout

Plug and Play utilizing factory brake lights

Custom rear T harness plugs into the left and right tail light harness

Extended length harness fits 2 and 4 seat models

Includes Pulse bar harness

Looking for a true plug and play way to add turn signals to your  19+ RZR xp1000, 19-21 Turbo and 18-21 Turbo S  that utilizes the factory tail lights?

We've designed a great plug n play solution at a very reasonable price.