Components:

Front lights: 3/4 LED Recessed (clear lens, amber light)

3/4" Recessed Bullet LED Light - Amber Lens / Amber Light. Most of our kits ship with 3 lights per side which allows for a light to be installed around to the side for maximum visiblity.

Dash mounted rocker switch - blue backlight

Carling Contura Series switches match the factory switches on many vehicles. The blue backlights in the switch also function as turn indicators.

Adjustable flasher relay

Flasher relay with adjustable flash rate. Use the dial to adjust the flash rate. This flasher (CF3) can be replaced with the non adustable EP34 in a pinch. Installation: the relay should be mounted away from water. It is best to zip tie a plastic bag around the relay if you powerwash the interior of your vehicle.

Automotive style horn

Loud automotive style horn. 105db, 410hz.

Dash cluster tie-in

If you have a compatible instrument cluster, you may wish to utilize our cluster tie-in kit to utilize the indicator arrows in your OEM gauge. Simply snap the pins from our harness into the factory plug housing. Note: machines may have a compatible cluster (example: 2018 Ranger won't work). If you choose to utilize this feature, a complete test should be performed with machine off and machine running prior to installation. Most issues with installing the cluster harness can be solved by pressing the harness pins further into the housing. The pins may click before they are fully seated. Green led indicators are included for those unable to take advantage of the cluster tie-in. more info here

Rear tail light tie-in harness

Rear T-Harness adds rear turn signal functionality to the factory tail lights. The harness Ts into the factory harness at each rear tail light. Your vehicle needs to have tail lights with the 4 pin plug shown in the photos below.

Accessory power plug tie-in

No wiring hassle — the Pulse Plug connects straight to the Polaris Pulse Bar to power your turn signal system.

Features

Kit is designed around a main control module front harness and a custom rear tail light T harness.

Rocker switch harnesses are prewired into the main control module and simply plug onto the back of the rocker switch. No fubling with qd's or splicing wires.

Blue illuminated Left / Right rocker lights up with key on and also flashes when selected thus indicating direction.

Hazard function works even with key off for most units.

Includes optional instrument cluster integration for machines with the instrument cluster shown.

Specifications

Always consult your local and State laws if you intend to utilize this kit to make your machine street legal. Depending on the laws in your area this kit may or may not comply with street legal requirements.

Installation

Installation times will vary based on your familiarity with the vehicle. A beginner could plan on spending 5 hours on the install while an installer could plan on 20 to 30 minutes.

Painfully simple to install. All components terminated with connectors allowing for full plug and play operation.

Rear T harness plugs into the left and right tail lights utilizing the rear brake lights as turn signals.  We also supply a license plate light pigtail that can activate your license plate light with key on. This custom harness feeds from the rear of machine through tunnel and up into hood compartment where it feeds through firewall into dash and plugs into the turn signal control module.

A complete front end control module and switch harness is finished off with sealed LED lights (2 per side) mount into a 3/4" diameter hole to provide a clean oem appearance. This harness also includes wires for the horn allowing easy connection of the horn.

A combination hazard / horn rocker switch saves space in your dash while maintaining all the bells and whistles.

A loud throaty automotive style horn is included. This is no beep-beep toy sounding ATV or Motorcycle horn that you find on many other kits on the market folks! It is a legit auto/truck horn with a deep tone that will put many car horns to shame!

All plug and play. Everything plugs together.

Only 3 connections to the vehicle:       12v+ (battery)       12v+ keyed (ignition)      12v- (ground)

A pulse power harness is included for machines with the pulse power bar.

Total install time:  approx 1 hour

Description

MCSADVENTURES Rocker turn signal & horn kit

Fits 2024 RZR XP 1000

Check tail light plugs to verify fitment

Rocker switches snap into .83 X 1.48 cutout

Plug and Play utilizing factory brake lights

Custom rear T harness plugs into the left and right tail light harness

Extended length harness fits 2 and 4 seat models

clear / amber front indicators

Includes Pulse bar harness for newer 2019+ machines.

NOTE:  For 18+  Polaris Ranger 1000 models, this switch will NOT fit if your switch hole is already punched out for OEM sized switches as this switch fits into a slightly smaller cutout than the OEM switches. However, these will fit into any cutout that you cut out manually. For all 18+ Ranger 1000 models, we highly suggest using our Ranger specific kit  Part # 62910 which utilizes OEM sized rocker switches.

Looking for a true plug and play way to add turn signals to your  2024 RZR XP 1000  that utilizes the factory tail lights?

We've designed a great plug n play solution at a very reasonable price.