Components:

Front lights: Fang lights

These front fang lights include white running lights and amber lights that are uses as turn indicators. Mounting Tabs hold the lights to the back of the factory grill. Connect the included power harness to 12v+ keyed ignition and to 12v- ground. Plug the turn wire into the front turn signal harness.

Dash mounted rocker switch - orange backlight

Carling Contura Series switches match the factory switches on many vehicles. The orange backlights in the switch also function as turn indicators.

Adjustable flasher relay

Flasher relay with adjustable flash rate. Use the dial to adjust the flash rate. This flasher (CF3) can be replaced with the non adustable EP34 in a pinch. Installation: the relay should be mounted away from water. It is best to zip tie a plastic bag around the relay if you powerwash the interior of your vehicle.

Automotive style horn

Loud automotive style horn. 105db, 410hz.

Dash cluster tie-in

If you have a compatible instrument cluster, you may wish to utilize our cluster tie-in kit to utilize the indicator arrows in your OEM gauge. Simply snap the pins from our harness into the factory plug housing. Note: machines may have a compatible cluster (example: 2018 Ranger won't work). If you choose to utilize this feature, a complete test should be performed with machine off and machine running prior to installation. Most issues with installing the cluster harness can be solved by pressing the harness pins further into the housing. The pins may click before they are fully seated. Green led indicators are included for those unable to take advantage of the cluster tie-in. more info here

Rear tail light tie-in harness

Rear T-Harness adds rear turn signal functionality to the factory tail lights. The harness Ts into the factory harness above the clutch cover. . Your vehicle needs to have the 4 pin plug shown in the photos below.

Accessory power plug tie-in

No wiring hassle — the Pulse Plug connects straight to the Polaris Pulse Bar to power your turn signal system.

Features

Kit is comprised of a main control module harness which connects to 2 sub harnesses.

Rocker switch harnesses are prewired into the main control module and simply plug onto the back of the rocker switch.

Amber illuminated Left / Right rocker lights up with key on and also flashes when selected thus indicating direction.

Hazard function works even with key off! (Very crutial and a function often overlooked by the competition)

Includes optional instrument cluster integration for machines with the instrument cluster shown.

A custom rear T harness plugs into factory tail light harness and converts facotory brake lights for use as brake AND turn signals. We also supply a license plate light pigtail that can activate your license plate light with key on. (license plate mount or light NOT included)

Replacement front fang lights add turn function

A combination hazard / horn rocker switch saves space in your dash while maintaining all the bells and whistles.

A loud throaty automotive style horn is included. This is no beep-beep toy sounding ATV or Motorcycle horn that you find on many other kits on the market folks! It is a legit auto/truck horn with a deep tone that will put many car horns to shame!

All plug and play. Everything plugs together.

Only 3 connections to the vehicle:       12v+ (battery)       12v+ keyed (ignition)      12v- (ground)

Specifications

Always consult your local and State laws if you intend to utilize this kit to make your machine street legal. Depending on the laws in your area this kit may or may not comply with street legal requirements.

Installation

Installation times will vary based on your familiarity with the vehicle. A beginner could plan on spending 5 hours on the install while an installer could plan on 20 to 30 minutes.

Lift bed to locate 4 pin plug on top rear driver side frame area.
Rear T harness utilizes the rear brake lights as turn signals feeds from rear of machine through tunnel and up into hood compartment where it feeds through firewall into dash and plugs into the turn signal switch.

A complete front end harness with sealed LED lights feeds through firewall into dash and also plugs into the turn signal switch.  This harness also includes wires for the horn allowing easy connection of the horn.

Custom front LED tube brackets simply clip into the front fascia under each headlight by removing only the outer screw on each headlight. Installation of these front tubes only takes a few minutes and does not require any drilling or cutting.

Painfully simple to install. All components terminated with connectors allowing for full plug and play operation.

Rear harness easily feeds from rear through center tunnel in just a few minutes by simply lifting out cup holders and center dash switch control plate. No tools needed or major components to remove. 

 A pulse harness is also included for easy installation on newer machines with the pulse power bar.

Total install time for kit:  approx 1 hour

Description

MCSADVENTURES Rocker turn signal & horn kit with replacement fang lights

Rocker switches snap into .83 X 1.48 cutout

Plug and Play utilizing factory brake lights

Fits all year Polaris General models

Extended length harness fits 2 and 4 seat models

Includes Pulse bar harness for newer 2019+ machines.

****No holes or cutting required****

Looking for a true plug and play way to add turn signals to your General that utilizes the factory tail lights?

We've designed a great plug n play solution at a very reasonable price.

Front accent light kit for Polaris General models

White illumination with key on

Flashes amber when turn selected

Power harness included

Painfully simple to install in just a few minutes

ZERO holes to drill

Connect the yellow fuse holder to a 12v+ key on power source

Connect the black wire to ground

Plug the lights in via the included harness.

Each remaining single yellow wire on the lights should connect to the signal wire coming from the turn signal kit. Once installed and connected correctly, the lights should illuminate white with key on and flash amber when a turn is selected.